Paper Honeycomb Process Machine Beautiful Appearance, Surface Lubrication

Paper Honeycomb Process Machine is exempt from packaging materials, in the export of the box to save the pest control, reduce the clearance procedures, can completely satisfied with large, fine, single, small quantities of machinery and other packaging products. In combination, honeycomb packaging has the following advantages compared to log packaging.

1. Honeycomb paperboard using the original paper material through the automatic honeycomb paperboard processing, from the packaging recycling rate, it is far superior to the log packaging, honeycomb paperboard recycling rate of more than 95%, while the log packaging Only 70%.

2. From the material offer point of view, honeycomb board offer much lower than the wood packaging materials. From the box processing point of view, Paper Honeycomb Process Machine molding machine can be used to replace the artificial, production efficiency is much better than the log packaging.

3. Paper Honeycomb Process Machine packaging exports free fumigation, can be directly off, the procedure is simple; wood packaging is the demand for fumigation, improve the cost.

4. Paper Honeycomb Process Machine quality is light 1/3 of the logs, in terms of load from the point of view, Paper Honeycomb Process Machine honeycomb structure, so that the force evenly, with excellent buffer damping capacity, load-bearing strength and logs almost, through the disposal, Even beyond the load of logs.

5. Paper Honeycomb Process Machine appearance, surface lubrication, easy to print text. Honeycomb packaging helps to enhance the company's brand and image.

1. Adjustment of bearing clearance

In order to ensure that the honeycomb paperboard production line bearings normal operation, usually to leave the appropriate bearing clearance (clearance). There are two ways to adjust the bearing gap: one is to adjust the thickness of the pad to adjust the bearing gap (Figure 14 a 10a bearing cover and the seat between the gasket); the other is to use the adjustment screw 1 through the bearing The outer ring cover 2 to move the bearing outer ring to adjust the bearing clearance, after adjustment, with the nut 3 lock loose.

2. Adjustment of the axial orientation of the shaft

The purpose of adjusting the axial orientation of the shaft is to ensure that certain parts of the shaft are accurately engaged. Paper Honeycomb Process Machine production line of the straight bevel gear transmission, the demand for two-tapered cone to ensure their proper engagement, should make the two bevel gear shaft according to the direction of adjustment to the solid line orientation, paper angle production line The thickness of the gasket between the end face and the base can adjust the axial orientation of the bevel gear shaft. The main plane of the worm gear is the axis of the worm, and the worm wheel shaft is adjusted axially. The same time as

3. Preload of bearings

Preload of the bearing is its axial preload. For certain adjustable clearance bearings in the device to give a certain axial preload force to make the relative displacement of the inner and outer ring to eliminate bearing clearance and in the ferrules and tumbling touch the Department of the occurrence of a certain degree of elastic pre-deformation, and thus Improve the rotation accuracy of the shaft and the rigidity of the bearing assembly, reducing the oscillation and noise. Preload can be used in the bearing outer ring (or inner ring) between the metal gasket or the outer ring (or inner ring) and other methods to obtain.